Pour over gets easier the minute you stop chasing a magic recipe. Start with one dependable ratio, use a scale, and make one small adjustment when the cup tells you it needs one. That is enough to turn a careful ritual into a repeatable morning coffee.

Start at 1:16

A good starting pour over coffee ratio is 1:16. That means 1 gram of coffee for every 16 grams of water. For example, 20 grams of coffee uses 320 grams of water. It is a balanced middle ground: full enough to feel satisfying, but open enough for sweetness and aroma to come through.

The National Coffee Association's pour-over guide places common recipes between 1:13 and 1:16. That range is not a rulebook. It is useful permission to start at 1:16, then move toward 1:15 when you want more body or toward 1:17 when you want a lighter cup.

THE EASY STARTING POINT20 grams coffee + 320 grams water = one generous mug at a 1:16 ratio.

Use grams for both ingredients. Water is close enough to one gram per milliliter that your scale keeps the math easy. Tablespoons can get you through a camping trip, but they are not consistent enough to teach you what changed from one brew to the next. A basic scale is the most useful pour-over upgrade because it gives you a recipe you can repeat.

Pour over coffee ratio chart

Choose the water amount that matches the cup or carafe you want to make, then use the table as a starting dose. These numbers describe the water you pour through the coffee, not the amount that lands in your cup. The grounds hold back some water, so brewed coffee will weigh less than the water you started with.

Water to pour1:15, fuller1:16, balanced1:17, lighter
240 g, about 8 oz16 g coffee15 g coffee14 g coffee
320 g, large mug21 g coffee20 g coffee19 g coffee
360 g, about 12 oz24 g coffee22.5 g coffee21 g coffee
480 g, two cups32 g coffee30 g coffee28 g coffee
600 g, larger carafe40 g coffee37.5 g coffee35 g coffee

If you are brewing for two, double both coffee and water, keep the same ratio, and give the larger bed enough room to drain. A bigger recipe can need a slower pour or a slightly coarser grind, but the ratio itself stays simple.

What the ratio changes, and what it does not

Ratio changes concentration. More coffee in the same amount of water creates a fuller, stronger-tasting cup. Less coffee creates a lighter one. It does not automatically fix bitterness, sourness, or a brew that ran through too fast. Those are usually clues about extraction, and grind size is the first thing to inspect.

Keep that distinction clean. If your coffee tastes watery but pleasant, use a slightly tighter ratio. If it tastes sour, thin, or hollow, the water may not have spent enough time with the grounds. If it tastes harsh, dry, or aggressively bitter, it may have spent too long. Our coffee grind size chart gives you a clear way to adjust without changing every variable at once.

Bag of Evolve Bean Carolina Morning breakfast blend

For the first few brews, keep the ratio steady at 1:16. Write down the coffee dose, water amount, grind direction, and whether the cup felt thin, balanced, or heavy. That tiny record makes the next adjustment sensible instead of random. A good coffee routine should teach you something, not ask you to become a part-time laboratory technician.

Use a medium grind, then listen to the drawdown

Start with a medium grind, roughly the texture of regular sand. The National Coffee Association also points new pour-over brewers to a medium grind. A cone brewer with a large opening can need a touch finer than a flat-bottom brewer, but medium is still the right first move.

Watch what happens after the last pour. A cup that drains in a rush can be thin because the water did not have enough contact time. Go a little finer next time. A cup that drips endlessly can taste harsh or heavy. Go a little coarser. Make small moves, not giant swings. One or two clicks on a burr grinder can be plenty.

Freshly ground whole bean coffee gives you more control because you can change the grind for the brewer in front of you. If you prefer convenience, choose a bag ground for drip and use a forgiving ratio. The whole bean coffee collection is a good place to start when you want to dial in your own grinder.

A dependable method for one large mug

This recipe makes one generous serving. It works as a starting point for cone or flat-bottom paper-filter brewers. Your brewer's own instructions always come first, especially for filter shape and capacity.

  1. Heat 320 grams of water. Aim for water just off the boil. The National Coffee Association lists 93 ± 3°C, or about 199–205°F, as a useful target.
  2. Rinse the paper filter. Set the brewer over your carafe or mug, pour hot water through the filter, then discard that water. This warms the brewer and removes a papery taste.
  3. Add 20 grams of medium-ground coffee. Level the bed with a gentle shake, then tare your scale.
  4. Bloom with 40 to 50 grams of water. Wet all the grounds, wait 30 to 45 seconds, and let the coffee puff and bubble.
  5. Pour steadily to 320 grams. Keep the stream calm and low. Start near the middle, work outward without soaking the paper wall, and return to the center.
  6. Let it finish draining, then taste. A useful first target is roughly 2½ to 3½ minutes from first pour to final drip. Use the clock as a clue for the next grind adjustment.

The Specialty Coffee Association's two-cup best-practice recipe uses 22 grams of coffee, 400 grams of water, a 50-gram bloom, and a 30-second rest. The point is not to copy every number forever. It shows why weighing, blooming, and pouring with intention produce a recipe you can refine.

Blooming is small, but it matters

The bloom is the short first pour that wets the grounds before the main brew. You will see the coffee rise and bubble as trapped gas escapes. Giving it 30 to 45 seconds helps the next pours reach the grounds more evenly instead of racing around dry pockets.

Use about twice the coffee's weight in water as an easy bloom amount. With 20 grams of coffee, pour 40 grams of water. With 15 grams, pour 30 grams. You do not need to stir aggressively. A gentle swirl or a small spoon stir is enough when dry patches remain.

Bag of Evolve Bean Common Ground everyday blend

Do not panic when a very fresh coffee blooms dramatically or an older coffee stays relatively quiet. Bloom is useful, but taste still gets the final word. A balanced cup with a modest bloom is better than a beautiful crater and a disappointing mug.

Fix the cup without starting over

Too weak or tea-like: first tighten the ratio from 1:16 to 1:15. If it still tastes hollow, grind a little finer. A faster brew often needs that finer step more than extra coffee.

Too bitter, dry, or heavy: grind a little coarser before changing the ratio. If the cup is still simply too concentrated after that, move from 1:16 toward 1:17. Keep your pour gentle, because hard pouring can disturb the bed and slow the drawdown.

Sour and thin: use a slightly finer grind and make sure all grounds are wet during the bloom. Sourness often points to an under-extracted brew, not a need to keep pouring longer without a plan.

Inconsistent from day to day: check the scale first. Then use the same coffee, water amount, and starting grind for three brews before reaching a conclusion. Most home inconsistency comes from changing three things at once.

Pick coffee that suits your morning

Pour over is especially satisfying with coffee you want to taste clearly. A balanced bag such as Common Ground is an easy everyday choice when you want cocoa, nutty sweetness, caramel, and citrus to stay readable. Carolina Morning gives you a gentler first cup with low acidity, while Rooted brings a medium-dark, milk-chocolate-and-almond direction for a richer mug.

If you prefer a more intense cup, pour over can still work with a darker roast. Start at 1:16, keep the water just off boil rather than rolling hard, and taste before changing anything. Our coffee roast levels guide can help you choose the direction you enjoy, while the full coffee collection makes it easy to find the next bag.

Bag of Evolve Bean Ignite espresso blend

Once you understand ratio, the same thinking travels well. Use the coffee grounds per cup guide for an automatic brewer, the French press ratio guide for a fuller immersion brew, or the cold brew ratio guide when you want a cold coffee waiting in the fridge.

Keep your first recipe deliberately boring

The quickest path to a better pour over is usually a less dramatic one. Pick one coffee, one water amount, one ratio, and one starting grind. Brew it two or three times before deciding it is not for you. This gives your taste buds something fair to compare instead of asking them to judge a new ratio, a new grinder setting, and a new bag all at once.

When you want a fuller cup, change only the ratio to 1:15 and keep the grind where it was. When the drawdown is slow and the cup feels dry, return to 1:16 and go a little coarser. When the coffee is thin and fast, return to the same ratio and go a little finer. Small notes make this easy: coffee dose, water dose, brew time, and one honest line about the cup. Within a few mornings, you will have a recipe that belongs to your brewer and your taste, not a recipe you are trying to force yourself to enjoy.

Frequently asked questions

What is the best pour over coffee ratio?

Start with 1 gram of coffee for every 16 grams of water. For one generous cup, 20 grams of coffee and 320 grams of water is a reliable place to begin. Use a little more coffee for a fuller cup or a little less for a lighter one.

How much coffee do I use for one pour over cup?

For an 8-ounce cup, use about 15 grams of coffee with 240 grams of water at a 1:16 ratio. For a larger 12-ounce mug, use about 22 to 23 grams of coffee with 360 grams of water.

Should pour over coffee be medium or fine ground?

Start at a medium grind, similar to regular sand. If the coffee runs through very quickly and tastes thin or sour, grind a little finer next time. If it drains slowly and tastes harsh or bitter, go a little coarser.

Why does my pour over taste weak when I use the right ratio?

A correct ratio is only the starting point. Uneven pouring, a very coarse grind, cool water, or a fast drawdown can all leave the cup under-extracted. Change one variable at a time, starting with grind size, so you can tell what helped.